To ensure a great fit, the Lillipad has adjustable footpads and is available in two heights (short and tall).
The Lillipad is in position in photo 1 below. Measure from the front point of the toilet bowl back 125 mm (5 in.) — this is the distance from the crossbar to the heel of the footpads where they appear to touch the toilet in photo 1. Measure the width of the toilet at this point. The inside gap between the heels of the footpads on the Lillipad is 340 mm (13⅓ in.), but can be easily adjusted from 315 mm (12⅓ in.) to 375 mm (14¾ in.)
The Lillipad is designed to sit lower than the rim of the toilet — photo 2.
The footpads slope forward and slightly inwards for comfort.
The short Lillipad is 330 mm (13 in.) high, 555 mm (21¾ in.) wide, and 282 mm (11⅛ in.) deep.
The tall Lillipad is 385 mm (15¼ in.) high, 565 mm (22¼ in.) wide, and 285 mm (11¼ in.) deep.
To order the correct Lillipad — lift the seat and measure from floor level to the rim of the toilet. If this measurement is under 400 mm (15¾ in.) choose the short Lillipad. If it is 400 mm (15¾ in.) or greater, then order the tall Lillipad.
1
2 
In the photos above the Lillipad is in the correct position but
just fits the space around the toilet.
The wall in front of the toilet should be no closer than 300 mm
(12 in.), and the wall to the side of the toilet no closer than
100 mm (4 in.).
